Di Posting Oleh : Crew Blog
Kategori : Broadband DSL How-to Modem Configuration Networking
Brief Specification :
* ADSL2+ compliant modem* 4 LAN ports
* 1 ADSL port
* Wifi enabled.
To configure this ADSL modem, connect it properly.
1. Open the browser & type its access IP :192.168.1.1 in the address bar of the browser.You would be prompted with a dialog box.Enter Username : admin , Password : admin & click OK.
2. Click on Advanced Setup , then WAN.If the setting with port/VPI/VCI = 0/0/35 shows up delete it by clicking on Remove checkbox and then clicking on Remove button.Next click on Add.
4. Confirm port=0, VPI=0 and VCI=35 (for BSNL) and click �next�.
For VPI/VCI values of other ISPs click here.
5. Click on PPP over Ethernet (PPPoE) and Mode=LLC/SNAP-Bridging click �next�.
6. Type PPP Username=your Broadband User name, PPP password=Your Broadband Password. Keep your PPoE Service Name= your ISP name, Authentication Method= AUTO. Click on Next.
7. Confirm enable �NAT�, enable 'Firewall', enable �WAN Service� is Checked, Service Name=pppoe_0_35_1.Click on Next.
8. Verify WAN Setup �Summary. If all are ok, click on save. Then save/reboot. Wait till the main page re-opens.In the main WAN page, then click on Save/Reboot.
This completes the Internet connection set up for the modem.
The Wifi configuration is the same as in Nokia Siemens SL2_141.
If you have any further queries, feel free to post in comments or Contact Us
If you have any further queries, feel free to post in comments or Contact Us